|
Arpol Brochure
|
|
|
Arpolube Greases
|
ARPOLUBE 907
U.S. MILITARY SPECIFICATION: MIL-PRF-907E
AN ANTISEIZE COMPOUND, FOR HIGH TEMPERATURE APPLICATION. THIS PRODUCT HAS EXCELLENT LUBRICITY FEATURES AND IS SPECIFICALLY CREATED FOR USE ON THREADS OF STEEL NUTS, STUDS, BOLTS AND OTHER MATING SURFACES.
ARPOLUBE 4343
U.S. MILITARY SPECIFICATION: MIL-G-4343C NATO: G-392
A LUBRICANT FOR USE BETWEEN RUBBER AND METAL PARTS OF PNEUMATIC SYSTEMS. IT MAY ALSO BE USED FOR PRESSURIZED CABIN BULKHEAD GROMMETS AND OTHER MECHANISMS REQUIRING RUBBER TO METAL LUBRICATION.
ARPOLUBE 5544
U.S. MILITARY SPECIFICATION: MIL-T-5544C NATO: S-720
THREAD COMPOUND, ANTISEIZE, GRAPHITE-PETROLATUM
FOR USE ON AIRCRAFT ENGINE SPARK PLUGS AND THREADED FASTENERS AND FITTINGS. CAN BE USED SAFELY IN CONTACT WITH AUSTENITIC STAINLESS STEELS, TITANIUM, NICKEL AND COBALT ALLOYS, AND SIMILAR CORROSION RESISTANT METALS AND ALLOYS.
THIS MATERIAL IS AN ELECTRICAL CONDUCTOR. APPLY LIGHT COATING TO LOWER SPARK PLUG THREADS ONLY. MATERIAL MUST NOT COME IN CONTACT WITH SPARK PLUG TERMINAL OR ELECTRODES. DO NOT USE IN OXYGEN SYSTEMS, EXPLOSION MAY RESULT.
AT APPLICATIONS BELOW 538 DEGREE C, MIL-T-83483 SHOULD BE USED.
ARPOLUBE 6032
U.S. MILITARY SPECIFICATION: MIL-G-6032D AM.1 TYPE 1 NATO: G-363
FOR USE IN TAPERED PLUG VALVES. PROVIDED FOR THE USE OF HIGH PRESSURE LUBRICATION EQUIPMENT, FOR SERVICING THOSE VALVES WHICH REQUIRE A STICK TYPE LUBRICANT. MAY ALSO BE USED AS A GASKET LUBRICANT OR SEAL AND FOR GENERAL PLUG VALVE SERVICE IN SYSTEMS WHERE GASOLINE, OIL, ALCOHOL, OR WATER RESISTANCE IS REQUIRED.
ARPOLUBE 10924D
U.S. MILITARY SPECIFICATION: MIL-G-10924D AM.2
INTENDED FOR THE LUBRICATION AND SURFACE CORROSION PROTECTION OF ALL AUTOMOTIVE AND ARTILLERY EQUIPMENT OPERATED OVER THE TEMPERATURE RANGE OF -54 DEGREE C TO +121 DEGREE C. MAY ALSO BE USED FOR OTHER APPLICATIONS IN THIS TEMPERATURE RANGE, BUT NOT IN MACHINERY THAT COMES IN CONTACT WITH FOOD.
ARPOLUBE 10924F
U.S. MILITARY SPECIFICATION: MIL-G-10924F NATO: G-403
THE GREASE COVERED BY THIS SPECIFICATION IS INTENDED FOR THE LUBRICATION AND SURFACE CORROSION PROTECTION OF ALL GROUND VEHICLES AND EQUIPMENT OPERATED OVER THE TEMPERTURE RANGE OF -54 TO +180 DEGREE C.
ARPOLUBE 18709
U.S. MILITARY SPECIFICATION: MIL-G-18709A AM.3
GREASE, BALL AND ROLLER BEARING
FOR USE IN BALL AND ROLLER BEARINGS AT TEMPERATURES RANGING FROM 32 DEGREE F TO 225 DEGREE F CONTINUOUS RUNNING AND FOR MODERATE PERIODS UP TO 250 DEGREE F.
ARPOLUBE 21164
U.S. MILITARY SPECIFICATION: MIL-G-21164D NATO: G-353
GREASE, MOLYBDENUM DISULFIDE, FOR LOW AND HIGH TEMPERATURES
FOR USE AS A LUBRICANT ON ACCESSORY SPLINES, HEAVILY LOADED SLIDING STEEL SURFACES, OR FOR ANTI-FRICTION BEARINGS CARRYING HIGH LOADS AND OPERATING THROUGH WIDE TEMPERATURE RANGES.
ARPOLUBE 23549
U.S. MILITARY SPECIFICATION: MIL-G-23549C
THIS MOLYBDENUM DISULFIDE GREASE IS INTENDED FOR GENERAL PURPOSE USE FOR APPLICATIONS REQUIRING NORMAL HIGH TEMPERATURES UP TO 177 DEGREE C OR BRIEF EXPOSURE TO TEMPERATURES UP TO 204 DEGREE C. CAN BE USED FOR SYSTEMS REQUIRING LOW SPEED, HIGH LOAD, SALT WATER AND CONTACT WITH HIGH PRESSURE STEAM. THIS GREASE IS SUITABLE FOR LUBRICATION OF CATAPULT FOOT PADS, AUTOMOTIVE AND GROUND SUPPORT EQUIPMENT.
ARPOLUBE 23827
U.S. MILITARY SPECIFICATION: MIL-G-23827B AM.1
NATO: G-354
AN AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW GREASE, BLENDED WITH A STATE OF THE ART SYNTHETIC OIL. CONTAINS CORROSION AND OXIDATION INHIBITORS, AND HAS SUPERB LOAD-CARRYING CAPABILITY.
ARPOLUBE 25537
U.S. MILITARY SPECIFICATION: MIL-G-25537C AM.1
NATO: G-366
A HELICOPTER MULTI-PURPOSE GREASE COMPOSED OF MINERAL OIL THICKENED WITH A CALCIUM SOAP. IT POSSESSES OUTSTANDING ANTI-FRET AND ANTI-MOISTURE PROPERTIES AND IS OXIDATON AND CORROSION INHIBITED.
ARPOLUBE 27617
U.S. MILITARY SPECIFICATION:
MIL-PRF-27617F Type 1,2,3,4,5
A LIQUID FUEL AND LIQUID OXYGEN RESISTANT GREASE FOR USE AS LUBRICANTS IN AIRCRAFT, AEROSPACE VEHICLES AND SUPPORTING EQUIPMENT.
ARPOLUBE 47219
U.S. MILITARY SPECIFICATION: MIL-G-47219 (MI)
A HALOFLUOROCARBON GREASE INTENDED FOR USE AS A NON-HYDROCARBON LUBRICANT OF SCREW THREADS AND O-RING COMPONENTS USED IN HIGH PRESSURE AIR SYSTEMS.
ARPOLUBE 81322
U.S. MILITARY SPECIFICATION:
MIL-PLF-81322F NLGI 1 and NLGI 2
A GENERAL PURPOSE AIRCRAFT GREASE WITH A WIDE TEMPERATURE RANGE. THIS GREASE WAS SPECIFICALLY DESIGNED FOR AIRCRAFT WHEEL BEARINGS IN INTERNAL BRAKE WHEEL ASSEMBLIES, ANTI-FRICTION BEARINGS, GEAR BOXES AND PLAIN BEARINGS.
ARPOLUBE 81827
U.S. MILITARY SPECIFICATION: MIL-G-81827A
A HIGH QUALITY LUBRICANT USED FOR HEAVILY LOADED SLIDING STEEL SURFACES. USED ON HEAVILY LOADED ACCESSORY SPLINES, SLIDING SURFACES AND ANTI FRICTION BEARINGS OPERATING THROUGH A WIDE TEMPERATURE RANGE (-54 DEGREE C TO 177 DEGREE C) WHERE MOLYBDENUM DISULFIDE WILL DELAY OR PREVENT SEIZURE IN THE EVENT OF INADEQUATE LUBRICATION.
|
|
|